RockSolid Industrial Moisture Stopping Primer Kit
Model Number: RSI-HSP-5G
Description & Documents
RockSolid Industrial Moisture Stopping Primer is a two component, 100% solids, moisture vapor transmission (MVT) blocking and pH resistant epoxy primer used to remedy concrete floors with high moisture levels before the application of finish coatings. Capable of holding back up to 25 lbs. of MVT, this primer has excellent adhesion to even the most moisture laden concrete slabs. RockSolid Industrial Hydro Stopping Primer also exhibits great self-leveling properties and is unaffected by high pH levels up to 14, making it the perfect solution on any concrete surface. This coating should be used when calcium chloride test results are higher than the specified 3 lbs./1000 sf/24 hours rating, or when pH levels exceed 7-8 as specified in the Concrete Preparation section of the manual.
- 5 gallon kit
- 100% Solids
- 3 parts A : 2 Parts B mix ratio
- 1 Coat - Applied with 1/4" Notched Squeegee and Backroll at 450 sf/kit holds back up to 25 lbs. of MVT (3/8" NAP x 18" Roller)
- *** Specialty Coating - MUST BE APPLIED OVER SHOT BLAST CONCRETE - Please contact RockSolid Industrial Technical department prior to use
Brand Name: RockSolid Floors
Please Note: Prices, promotions, styles and availability may vary by store and online. While we do our best to provide accurate item availability information, we cannot guarantee in-stock status and availability as inventory is sold and received continuously throughout the day. Inventory last updated 11/26/2014 at 5:00am EST. Online orders and products purchased in-store qualify for rebate redemption. Rebates are provided in the form of a merchandise credit check which can only be used in a Menards store.