Radiant Heat Panel - Rhp
Model Number: PX10231
Menards® SKU: 6809903
Description & Documents
The NIBCO® PEX Radiant Systems radiant heat panel model RHP includes the pump, thermostat, relay, limit switch, temperature gauge and installation manual. The radiant heat panel is pre-assembled and tested for installation and leak-free consistency. It is single zone, will provide up to 30,000 BTU/hr, and can be used with any tank type heat source. It is preassembled for quick trouble-free startups.The NIBCO® PEX Radiant Systems radiant heat panel model RHP serves efficient, comfortable radiant heating for an area up to 1,250 sq. ft. or 30,000 BTU/hr. The panel serves a single zone with up to five loops of 250 feet of 1/2" PEX or Barrier PEX tubing. This model of panel does not have a mixing device and depends on the heat source or other mechanism to control the water temperature supplied to the floor. The NIBCO® PEX radiant heat applications range from staple up between joists to in-floor concrete slabs in garages, pole barns, basements and single and multi-family residences. NIBCO® PEX tubing, fittings, valves, radiant heat panels and manifolds are designed to be used as a complete system. Please refer to NIBCO® PEX catalogs and installation manuals for engineering and installation information.The NIBCO® radiant heat panel is the heart of the NIBCO® PEX radiant heat system. The radiant heat panel contains the pump and other controls which help to circulate the water. The hot water is supplied by any tank type heating source and then distributed through PEX tubing installed in the floor. The heat from the water radiates from the floor up to maintain even temperatures from floor to ceiling while preserving natural humidity. The NIBCO® radiant heat system can save up to 40% over traditional heating systems. NIBCO® PEX radiant heat systems are backed by a one-year limited warranty. Our longstanding reputation for innovation and precision in design and manufacturing makes us a preferred brand in the industry.
- Single zone
- Up to 30,000 BTU/hr.
- Up to 1,250 sq. ft.
- Up to 5 loops of 250 ft. PEX ½" piping
- Mixing device not included
- Thermostat to activate the relay
- Limit switch which can be set for protection at 130° for floor heating or at 180° for baseboard heating
- Open or closed system
- Pump to move the heated fluid
- Relay to operate the pump
- Timer to allow for periodic summer activation