12" x 15" Bent Edge Galvanized Base for 3" - 4" Pipe
Model Number: 11963
Variation: Galvanized Metal
Description & Documents
Galvanized base has 3/4" bent edge to eliminate horizontal water flow.
- Metal base for pitch from 0-40° or up to 10/12 roof.
- Self-sealing collar slides over pipe and requires no calking
- Can be used in commercial or residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Rated 180°F continuous heat.
- Approved for Type B installations.
- Not for hot-mopped or built-up roofs.
- Made of rust-proof, stamped 24 guage galvanized steel
- Non-fading sealing collar.
- Do not use petroleum based products or paint on flashing collar.
- Patented All-Flash collar has tear-away ring allowing flashing to seal various pipe diameters.
Dimensions: 12" x 15" Bent Edge Galv Base for 3" - 4" Pipe
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.