18" x 18" Code Soft Alum. Base No-Calk® Roof Flashing for .5" - 1" pipe
Model Number: 11833
Description & Documents
Soft aluminum base No-Calk® roof flashing that allows easy molding around DWV pipe for pitch to 40 degrees for 18" x 18" code required areas..
- Rustproof .032 stamped aluminum standard base.
- Self-sealing collar slides over pipe and requires No-Calk®ing
- Can be used in commercial or residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Rated 180°F continuous heat.
- Approved for Type B installations.
- Metal base roof flashing slides over DWV pipe for pitch from 0-40° or up to 10/12 roof.
- Not for hot-mopped or built-up roofs.
- Non-fading sealing collar.
- Do not use petroleum based products or paint on flashing collar.
- 18" x 18" base for code required areas.
Dimensions: 18" x 18" Soft Alum Base for .5" - 1" Pipe
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.