18"x18" Aluminum Base All-Flash No-Calk Roof Flashing for 1.5"-3" Pipe
Model Number: 12974
Description & Documents
Aluminum base roof flashing that slides over DWV pipe on roof with ring on collar that tears off to allow flashing to seal different pipe diameters.
- Aluminum base roof flashing slides over DWV pipe for pitch to 40°.
- Ring on collar tears off allowing flashing to seal different pipe diameters.
- Can be used in commercial or residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Rated 180°F continuous heat.
- Approved for Type B installations.
- Metal base roof flashing slides over DWV pipe for pitch from 0-40°.
- Not for hot-mopped or built-up roofs.
- Non-fading sealing collar.
- Do not use petroleum based products or paint on flashing collar.
- Aluminum base flashings are made of .032 stamped aluminum.
Dimensions: 18"x18" Aluminum Base for 1.5"-3" Pipe
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.