18"x18" Code Galv. Base No Calk Roof Flashing for 1.25"-1.5" Pipe
Model Number: 11921
Variation: Galvanized Metal
Description & Documents
Galvanized base no-calk roof flashing that slides over DWV pipe for pitch to 40 degrees for 18" x 18" code required areas.
- Rustproof, stamped galvanized base, 24 or 28 gauge.
- Self-sealing collar slides over pipe and requires no calking
- Can be used in commercial or residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Rated 180°F continuous heat.
- Approved for Type B installations.
- Metal base roof flashing slides over DWV pipe for pitch from 0-40° or up to 10/12 roof.
- Not for hot-mopped or built-up roofs.
- Non-fading sealing collar.
- Do not use petroleum based products or paint on flashing collar.
- 18" x 18" base for code required areas.
Dimensions: 18"x18" Galv Base for 1.25"-1.5" Pipe
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.