18"x18" Code Soft Aluminum Base No-Calk® Roof Flashing for 2" Pipe
Model Number: 12849
Description & Documents
Soft aluminum base No-Calk® roof flashing that allows easy molding around DWV pipe for pitch to 40 degrees for 18" x 18" code required areas..
- Rustproof .032 stamped aluminum standard base.
- Self-sealing collar slides over pipe and requires No-Calk®ing
- Can be used in commercial or residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Rated 180°F continuous heat.
- Approved for Type B installations.
- Metal base roof flashing slides over DWV pipe for pitch from 0-40° or up to 10/12 roof.
- Not for hot-mopped or built-up roofs.
- Non-fading sealing collar.
- Do not use petroleum based products or paint on flashing collar.
- 18" x 18" base for code required areas.
Dimensions: 18"x18" Soft Alum Base for 2" Pipe
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.