Description & Documents
The HTWM20 Masonry Strap 1-1/4" x 20" x 7-3/4" is designed for truss to concrete or masonry connections, offering uplift resistance with variable heel height and positioning applications. Made of 14 gauge steel with G90 galvanizing finish.
- Use all specified fasteners: 4 1/4" x 1-3/4" wedge bolts for concrete, 8 10d z 1-1/2" nails for truss/rafter.
- Not for use with treated lumber.
- Strap may be attached to either side of grouted masonry or concrete wall with a minimum of (1) #5 horizontal rebar.
- Drill hole in concrete or masonry with manufacturer's prescribed 1/4" masonry drill. Install fasteners into concrete or masonry per manufacturer's specification.
- Grout or concrete compressive strength shall be 2,000 psi at 28 days.
- Twist straps do not have to be wrapped over the truss to achieve the allowable loads.
- Moisture barrier may be required.
Brand Name: USP Structural Connectors
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.