- Use all specified fasteners: 14 16d nails and 2 1/2" bolts.
- For use with treated lumber.
- Insert into wet concrete after the pour. For the WAS, embed the anchor until the concrete surface meets the bottom edge of the stand off base legs. This will provide a 1" stand-off where required. A 2" minimum edge distance is required to achieve allowable loads.
- Not recommended for fence posts or other unrestrained (not fixed or fastened at top) applications. These anchors are not designed to resist overturning (moment) loads.
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.