Description & Documents
The TD10S Cold Formed Steel Holdown 2-1/2" X 16-1/8" is a heavy capacity tension tie with a single piece formed back and welded base plate. 10 gauge steel strap, 3/8 gauge steel base. Primer paint finish.
- Use all specified fasteners: 1 7/8" anchor bolt for sill plate, 30 #10 screws for stud
- Not for use with treated lumber.
- Tighten anchor bolt nuts to finger tight, plus 1/3 to 1/2 additional turns with a wrench. Wood members may shrink over time; if possible, nut tightness should be checked periodically. To precent loosening of the anchor bolt nut during critical loading, use a locking nut or tighten a second nut over the first to lock nuts in place.
Brand Name: USP Structural Connectors
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.