The KHGLBD Laminated Beam Seat 8" x 10" x 3/8" is a single bolt, bearing only seat for laminated beams ranging from 3-1/4" to 9" (width must be specified when ordering). Made of 1/4" steel (flanges), 3/8" steel (bearing plate), and 3/4" x 12" rebar (anchor dowels) with primer finish.
- Use all specified fasteners: 2 3/4" bolts.
- Not for use with treated lumber.
- Bolt holes shall be a minimum of 1/32" to a maximum of 1/16" larger than the bolt diameter.
- Concrete or masonry walls must be checked by a design professional for adequacy to resist lateral or uplift loads transferred from the beam seat anchor.
Brand Name: USP Structural Connectors
Technical Specifications: view PDF file
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.