Delta 12-1/2" Variable-speed Midi-Lathe
Model Number: 46-460
Menards® SKU: 2401845
Description & Documents
Large 12-1/2" swing capacity provides the largest capacity in its class. Electronic variable speed with three-pulley speed ranges provide the required speeds needed to turn a project without changing belt position. Forward and reversing function allows the turner to achieve a superior finish. Sanding a turned piece with the grain causes the wood fibers to lie down and remain rough. Sanding a turned piece against the grain will cut the wood fibers smooth. Rotating the turned piece in both directions is the way to achieve this super smooth finish. With brands that do not have reversing, the turner would need to remount the work piece backward to achieve this dual rotation. This is time consuming and often impossible. With the Delta 46-460 it is a simple flip of the switch. Patented belt tensioning system for easy and quick speed changes and sets the belt at the correct tension every time for maximum power transfer and longer tool life. 6 groove belts provide superior power to turn large objects. All cast-iron construction provides stability and is extremely durable. Over headstock on/off switch provides easy in use access. Turning long spindles require either a longer tool rest or the user to continually move the short tool rest. Turning short work requires a short spindle; the long spindle will not allow the turner to get close enough to the piece. Accessory extension bed (model 46-463) is a 25-1/2" long cast-iron bed that increases the overall bed length of the 46-460 to 42". 6" and 10" tool rests provides tool support in a variety of turning applications.
To read PDF files, you need the Adobe Acrobat Reader 6.0 or higher. If you don't have it, click here and download it for free from Adobe's site.
- 1 hp, 120v, 60 Hz, 1 phase motor
- Electronic variable speed with three speed ranges; 250-750, 600-1,350 & 13,50-4,000 rpm
- 12 1/2" swing over bed
- 9 9/16" swing over base
- 16" distance between centers
- Drive spindle thread count 1"-8 rh tpi thread
- Drive spindle through hole 15/32"
- Head and tailstock taper #2 mt
- Tailstock through hole 13/32" self-ejecting
- Includes 6" and 10" tool rests, steel knock out bar, live and spur centers and wrenches
Please Note: Prices, promotions, styles and availability may vary by store and online. While we do our best to provide accurate item availability information, we cannot guarantee in-stock status and availability as inventory is sold and received continuously throughout the day. Inventory last updated 12/19/2014 at 5:00am EST. Online orders and products purchased in-store qualify for rebate redemption. Rebates are provided in the form of a merchandise credit check which can only be used in a Menards store.