Gas Patio Fire Pit
Project by Daniel - Lincoln, NE
Project by Daniel - Lincoln, NE
I removed an old rusty metal pergola and replaced it with a 340,000 BTU natural gas fire pit on our stamped concrete patio. The utility company upgraded my gas meter to a 2 PSI meter. Then, I used multiple black pipe fittings, regulators, and shut offs to setup new gas line. I ran a 3/4" Type K copper line from my house to the concrete patio. I cut a hole in the concrete patio and placed the copper line into the hole. I used multiple brass pipe fitting to build a 340,000 BTU burner that I placed within the Belgian Block Fire Pit. I added lava stone and lava fire rock to cover burner.
Tools / Materials
• Bosch® SDS Plus® Bulldog™ Rotary Hammer Drill Bit
• 3-1/2" x 7" Belgian Wedge Wall Block in Quarry Gray
• 3-1/2" x 7" Belgian Wedge Wall Block in Sienna
• 3-1/2" x 14" Belgian Large Wall Block in Sienna
• 3-1/2" x 14" Belgian Large Wall Block in Quarry Gray
• 3-1/2" x 8-3/4" Medium Belgian Wall Block in Sienna
• 3-1/2" x 1-3/4" Small Belgian Wall Block in Quarry Gray
• Bosch® SDS Plus® Bulldog™ Rotary Hammer Drill Bit
• 3-1/2" x 7" Belgian Wedge Wall Block in Quarry Gray
• 3-1/2" x 7" Belgian Wedge Wall Block in Sienna
• 3-1/2" x 14" Belgian Large Wall Block in Sienna
• 3-1/2" x 14" Belgian Large Wall Block in Quarry Gray
• 3-1/2" x 8-3/4" Medium Belgian Wall Block in Sienna
• 3-1/2" x 1-3/4" Small Belgian Wall Block in Quarry Gray
Loading...
Loading...